Hybrid vehicles operate under conditions that put extreme stress on the motor oil. These engines are smaller and operate at higher RPMs, increasing under hood temperatures that can break down the strength of the oil. In the city, the ‘stop and go’ driving and ‘on and off’ engine can contribute to greater thermal and mechanical stress on the oil. As the lubrication properties are depleted, this causes oil oxidation, deposit formation, engine wear and lower performance. With many OEMs recommending a 10,000-mile oil change interval, the oil needs to maintain its properties for a longer period of time.
HYBRID Engine Oil Treatment uses ‘polar attraction’ and C60 Fullerenes bonding technology to provide a strong layer of anti-wear, anti-friction, and extreme pressure protection. Extra inhibitors help control oil oxidation, decrease deposit formation, and extends the effectiveness of the oil. The treatment adds a tough lubricating film to metal parts to minimize wear during ‘stop and go’ and ‘on and off’ driving conditions. This formula has a low viscosity as recommended for hybrid vehicles.
Add during each oil change. Pour entire contents of bottle into crankcase prior to filling with new oil. Run engine for at least 5 minutes. One bottle will treat up to 5 quarts of motor oil. Dispose of container in accordance with the local, state and federal regulations.
P.O. Box 70607 Seattle, Washington 98127
1400 N.W. 52nd Street, Seattle, Washington 98107
Phone: (888) 227-3245
Fax: (206) 784-3219
Customer Service: (888) 227-3245